Posts
The Wiko Cink Peax 2 is equipped enough to
compete with most mid to high-end devices, with
its quad-core 1.2GHz processor, 1GB RAM, and a
4.5-inch screen, running Android 4.1.2. But if you
are unhappy with its performance, the device can
now be rooted, which should at least make it a bit
more alluring, now that it can be overclocked/
underclocked, themed, etc. The guide below
should have you rooted in no time
I. Before You Begin
1. Back up everything you think is important
before you start.
2. Charge your device to 75% or more before you
begin.
3. Make sure you have the right drivers installed.
If not, use this and then start the procedure.
II. Necessary Downloads
mt6589_rooting_pkg.zip [Download]
III. Rooting the Wiko Cink Peax
2
1. Enable USB debugging on your device. To do
this, go to Settings > Development options and
tick the USB debugging checkbox.
2. Connect your device to your PC. If there are any
drivers being installed at this point, let them do so
before continuing.
3. Extract mt6589_rooting_pkg.zip to a folder on
your desktop.
4. From the extracted folder, hold the Shift key on
your keyboard, right-click on run.bat , and click
on Run as administrator to start the rooting tool.
5. Follow the on-screen instructions and wait
until your device reboots.
Once your Wiko Cink Peax 2 reboots, it should be
completely rooted!
No comments